Checking And Replacing Fuses - Honda legend Owner's Manual

09/01/28 18:49:17 32SMG631_576

Checking and Replacing Fuses

If something electrical in your
vehicle stops working, the first thing
you should check for is a blown fuse.
Determine from the chart on pages
574 and 575 on petrol models, and
pages 576 and 577 on diesel models,
or the diagram on the fuse box lid,
which fuse or fuses control that
device. Check those fuses first, but
check all the fuses before deciding
that a blown fuse is the cause.
Replace any blown fuses, and check
if the device works.
FUSE BLOWN
Turn the ignition switch to the
1.
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
2. On the under-bonnet fuse box,
remove the cover from the fuse
box.
FUSE
BLOWN
Check each of the large fuses in
3.
the under-bonnet fuse box by
looking through the side window
at the wire inside. Remove the
screws with a Phillips-head
screwdriver.
CONTINUED
Taking Care of the Unexpected
Fuses
571