Replacing A Front Turn Signal Bulb - Honda 2009 Odyssey Owner's Manual

Hide thumbs Also See for 2009 Odyssey:
Table of Contents

Advertisement

Main Menu
Lights
Driver's side
BULB
CONNECTOR
2.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb by turning it one-
3.
quarter turn counterclockwise.
4.
Insert the new bulb into the hole,
and turn it one-quarter turn clock-
wise to lock it in place.
438
Table Of Contents
5.
Push the electrical connector back
TAB
onto the bulb. Make sure it is on
all the way.
6.
Turn on the headlights to test the
new bulb.
7.
If you replaced the high beam
headlight bulb on the passenger's
side, reinstall the power steering
fluid reservoir.
2009 Odyssey
Replacing a Front Turn Signal
Bulb
BULB
SOCKET
1.
Open the hood. Remove the
socket from the headlight
assembly by turning it one-quarter
turn counterclockwise.
2.
Pull the burned out bulb straight
out of its socket.
Push the new bulb straight into
the socket until it bottoms.

Advertisement

Table of Contents
loading

Table of Contents