Honda legend Owner's Manual page 490

09/01/28 18:37:46 32SMG631_490
Front ↑
COVER
2. Remove the cover on the back of
the headlight assembly by turning
it anticlockwise.
CLIP
BULB
CONNECTOR
3. Remove the electrical connector
from the bulb by pulling the
connector straight back.
4. Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way, and remove the bulb.
5. Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place, and clip the end into
the slot.
6. Push the electrical connector onto
the new bulb. Make sure it is
connected securely.
7. Reinstall the cover over the back
of the headlight assembly and turn
it clockwise to lock in place. Make
sure it is right side up; it is marked
''TOP.''
8. Turn on the headlights to test the
new bulb.
9.
On the left side
Put the battery back to its original
position, reinstall the nut on the
stay and tighten it securely.
Maintenance
Lights
485