Voice Feature Procedures; Handset And Speaker; Abbreviated Dialing (Ad) - Avaya 8410D User Manual

When you reset the speakerphone on your voice terminal, you hear a set of tones as the
speakerphone performs an acoustic test of the environment. When the tones stop, your
speakerphone has finished adjusting itself for optimal performance and is ready for use. For more
information about the Reset Speakerphone feature, see "Reset Speakerphone" in the section
Voice Feature Procedures later in this guide.
Note: If you are using an 8410B voice terminal, you must press
terminal) and then
Speaker
button, the voice terminal will automatically reset the built-in speakerphone when needed.
Speaker
To reset the 8410D
speakerphone (when the
voice terminal is first
powered up)

Voice Feature Procedures

Handset and Speaker

When placing calls or using the voice features, you have the option of doing so by lifting the
handset or by pressing
pressing simultaneously activates the built-in microphone so you can place and answer
Speaker
calls without lifting the handset.
Abbreviated Dialing
Before you can use this feature, AD buttons must first be assigned by your system manager.
(These AD locations can be assigned to actual buttons, or you may access them with the
softkeys.)
If you hear the intercept tone while programming, start over from the beginning.
To program/reprogram
an AD button
to reset the speakerphone. If you are using an 8410B without the
1
Press the softkey below Begin to reset the speakerphone
(Press the softkey below Cancel if you do not want to reset the
speakerphone at this time. However, note that the red light next to
will continue to flutter.)
Speaker
• If you press the softkey below Begin, the display shows the following
timed screen:
• You will hear a set of rising tones as the speakerphone adjusts itself
to the surrounding acoustical environment. These tones are automatic.
No user response is required.
. If your voice terminal is set for the Speakerphone feature,
Speaker
1
On a separate sheet of paper, write down the outside numbers,
extensions, and/or feature access codes you want to program
15 of 37
8410D User's Guide
(if it appears on your voice
Shift