Select Ring (And Ringer Volume) - Avaya 8410D User Manual

To adjust the
speakerphone to the
surrounding room
acoustics
Note: If you do not have a
Shift button, it is not
necessary to activate this
feature.

Select Ring (and Ringer Volume)

To select a personalized
ringing pattern (for
those 8410 voice
terminals which have a
button)
Shift
Note: For procedures on
selecting a personalized
ring for those 8410 voice
terminals that have a
Ring
button, see the next page.
1
While on-hook, press
Shift
• Red light next to
2
Press
Speaker
• Red light next to
• Red light next to
• You hear a series of tones as the speakerphone performs an acoustic
test of the environment. The display shows:
When the tones stop, your built-in speakerphone is ready for use.
1
Press
Shift
• Red light goes on steadily
2
Press
Hold
• Red light next to
• Current ringing pattern plays and repeats every three
seconds.
• If your 8410 has a display, it shows the ringing pattern you
are hearing, such as:
3
Continue to press (and then release)
using a display set, you can also press
cycle through all eight ringing patterns
4
When you hear the desired ringing pattern, press
• Your new ringing pattern is set
• If you have an 8410D, you hear confirmation tone
(two rising tones)
23 of 37
8410D User's Guide
goes on steadily
Shift
goes off
Shift
blinks
Speaker
winks
Shift
(or, if you are
Hold
Next
or ) to
Prev
again
Shift