Moneual RYDIS MR7700 User Manual page 39

04. Press the [Indicator number] button to set a room number.
Every time you press the button, the lamps are turned on in the order of "1-2-3-4-5".
When two or more indicators are installed, room numbers should not be duplicated.
CREAN
AREA SET
INDICATOR
MODE DISTANCE
05. Leave the door open.
If you do not want to clean the room with the indicator installed, close the door.
Set cleaning areas
Mode
Indicator
Distance
Indicator number
5
4
3
2
1
INDICATOR
NO.
Make limited cleaning areas
Operate in the room assortment mode.
Set the output distance for room assortment signals.
Every time you press the button, the distance is shifted as
follows: 1m(●) – 3m(●●) – 5m(●●●).
Set to fit to the door width.
Set the room number.
When you use 2 or more indicators, room numbers should not be
duplicated.
RYDIS MR7700 User Manual 39