Executing Macros - Moneual RYDIS MR7700 User Manual

08. Press the [MACRO SET] button on the remote controller during set up to cancel macro
setup.

Executing macros

Macro execution is available only through the remote controller.
If no macros are saved, macro execution will not occur.
If the robot cleaner is in operation, press the [START/
STOP] button on the remote controller to stop it before
proceeding.
If the robot cleaner is cleaning or powered off,
the macro execution will not work.
01. Press the [MACRO SEL.] button on the remote controller.
02. Select a macro number you want to execute, using the'Left'and'Right' direction
keys on the remote controller.
03. Press the [START/STOP] button on the remote controller.
After the voice announcement for the execution of the macro is played, the robot will
start cleaning according to the saved pattern in the macro setting.
During execution, the currently-selected macro number will blink.
04. After cleaning according to the current macro is completed, the voice announcement for
the completed execution will be played and the macro cleaning will be complete.
05. If an obstacle is detected during macro cleaning, the robot will go to the next control.
06. The robot will automatically start the inhalation fan work at the same time the inhalation fan
was initiated during macro setup.
07. Press the [START/STOP] button during the macro clean and, the macro execution will be
terminated.
08. When "automatic cleaning," "intensive cleaning," and "under-bed cleaning" are
entered, they are performed in order. In this case, the starting point of each function can
be different in each macro. Except for automatic cleaning, if the cleaner needs charging
while performing other functions, macro execution will be terminated.
OK
MANUAL
MANUAL
1
RYDIS MR7700 User Manual 37
3
2
OK
OK
OK
MANUAL
MANUAL