Installing The Product - Moneual RYDIS MR7700 User Manual

Installing Product
01. Plug the adapter power cord in the adapter and connect to a power outlet.
02. Connect the charger adapter with the charger.
Once the power is connected, the blue lamp will turned on at the front.
For appropriate charging of the product, the charger adapter should be connected with the power at all times.
03. Arrange the position of the charger.
Position the charger against a wall and remove objects within 1m to the right, left side and to the front.
The wall facing the rear of the charger should not be made of glass or glossy materials.
Insert the adapter into the compartment of the charger, properly.
If the charger is installed in a site under direct sunlight, automatic charging may not occur or the product can become
discolored.
Adjust the signal detection distance from 5 m to 8 m according
to the charger's location and room size.
16 RYDIS MR7700 User Manual
1m
1m
1m