Descriptions For Remote Controller Buttons - Moneual RYDIS MR7700 User Manual

Descriptions for remote controller buttons

Use various main and advanced functions conveniently with the remote controller.
Functions available only with the remote controller:
Setup of current time, setup of reservation, selection of rooms, under the bed cleaning mode,
macro setup and selection, mute tone,
adjustment of suction power and manual move/cleaning
RF signal modules of the remote controller may cause radio wave interference for certain usage
environments.
OK
MANUAL
① POWER button
Turns power on/off
If the product operation gets stopped due to errors, the button makes
the product go back to the operation mode.
② MODE button
Select the cleaning mode.
③ START/STOP button
Starts selected operation
Stops current cleaning and/or move
④ OK/MANUAL button
Used for manual cleaning operation (See page 30.)
Acts as [Ok] key in various setup modes.
⑤ DIRECTION buttons
Directs the robot to move forward backward, left, or ride in the manual
cleaning mode.
Selects values when setting up time and reservations
⑥ ROOM SEL. button
Selects a specific room to clean (See page 28.)
⑦ VACUUM button
Adjusts the strength of suction power
⑧ INTENSIVE button
Selects the focused cleaning mode (See page 25.)
⑨ CHARGE button
Moves the robot cleaner to the charger
⑩ SHADOW button
Selects the mode for cleaning under furniture (See page 27.)
RYDIS MR7700 User Manual 19