Using advanced cleaning functions
The product can perform cleaning of sites, which cannot be adequately cleaned through automatic
Cleaning mode.
For corners and some spots where the robot cleaner cannot go, the product will not be able to
clean completely.
Before using the advanced cleaning functions:
◆ You cannot select a different cleaning mode while the robot cleaner is cleaning or being
charged.
◆ In this case, you need to press the [Start/Stop] button to stop current operation and then select
a cleaning mode.
Focused cleaning
From the current position, the robot cleaner performs
focused cleaning over a 1 m-radius area.
If the site has many obstacles around it, the cleaning may
not be successful due to interference from them.
01. Select the focused cleaning mode.
Main body button
(None)
02. When cleaning is complete, the cleaner will stop at its current location.
OK
MANUAL
Remote controller button
OK
MANUAL
RYDIS MR7700 User Manual 25