Setup And Execution Of Macros(To Save Moving Lines); Setting Macros - Moneual RYDIS MR7700 User Manual

Setup and execution of macros
With several manual operations, you can make the robot move as you like and save
the movements, then have the robot follow the same pattern for future cleanings.

Setting macros

Macro setup is available only through the remote
controller.
If the power switch of the robot cleaner is turned off,
the setup will not be initialized.
Up to 50 different macro settings can be saved.
If the same controls are consecutively inputted,
they will not be saved.
If cleaning with different modes (automatic cleaning, intensive
cleaning, under-bed cleaning) even the modes used will be
memorized in the macro.
01. If the robot cleaner is in operation, press the [START/STOP] button on the remote
controller to stop it before proceeding.
If the robot cleaner is cleaning or powered off, macro setup will not work.
02. Press the [MACRO SEL.] button on the remote controller.
A currently-selected macro number will get lit on the main body screen.
03. When you press the [OK/MANUAL] button, the inhalation fan will activate.
The inhalation fan will stay on while the macro is executed.
04. Select a macro number with the left and right direction keys.
05. Press the [MACRO SET] button on the remote controller.
A currently-selected macro number will start blinking.
06. Adjust the robot with the up/down/left/right direction keys.
During macro setting, automatic cleaning is operated when you press the[MODE] key on
the remote control.
During macro setting, a user can additionally select ' charging' , 'automatic cleaning' ,
intensive cleaning' , 'under-bed cleaning' functions by pressing each button on the remote
controller.
In case of 'automatic cleaning' , room setting information is also stored.
07. To complete the setup, press the [START/STOP] button on the remote controller.
When the voice announcement for the completed setup is heard, the macro setup
will be finished (At this time, the upper display may blink).
If the input control is "Charging" during macro setting, the cleaner will move to the
charger after the setting.
36 RYDIS MR7700 User Manual
(To save moving lines)
1 7
3
OK
MANUAL
OK
MANUAL
2 5 8
OK
MANUAL
4 6
OK
MANUAL