Backup And Restore; Reset And Reboot - Yeastar Technology TA410 User Manual

TA410/810 User Manual

3.3.7 Backup and Restore

We can back up the configurations before resetting TA410/810 to factory defaults, and
then restore it on this package.
Figure 3-31 Backup and Restore
Notes:
1. Only configurations, custom prompts will be backed up.
2. If you have updated the firmware version, it's not recommended to restore using
old package.

3.3.8 Reset and Reboot

We can reset or reboot TA410/810 directly in this page.
Figure 3-32 Reset and Reboot
·Reboot System
Warning: Rebooting the system will terminate all active calls!
·Reset to Factory Defaults
Warning: A factory reset will erase all configuration data on the system.
Please do not turn off the system until the RUN light begins blinking. Any power
interruption during this time could cause damage to the system.
33/55