Table of Contents
Advertisement
Safety Instructions
Important
For safety purposes, you should read the instructions carefully before using the appliance for the first time.
Save for future reference.
The appliance is designed for domestic use and may only be installed and operated in accordance with these
instructions.
1.
All wiring must comply with local and national electrical codes and be installed by a qualified electrician. If you have any
questions regarding to the following instructions, contact a qualified electrician.
2.
The unit must be installed in accordance with national wiring regulations. Check available power supply and resolve any
wiring problems before installation and operation of this unit.
3.
For your safety and protection, this unit is grounded through the power cord plug when plugging into a matching wall
outlet. If you are not sure whether the wall outlet in your home are properly grounded, please consult an electrician. If
supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order
to avoid any hazards.
4.
This appliance is not intended for people（including children）with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appli-
ance by a person responsible for their safety. This appliance can be used by people aged from 8 years and above. Young
children should be supervised to ensure that they do not play with the appliance.
5.
Never place this unit in chemical environments, like volatile, corrosive or flammable environment, to avoid risk of fire.
6.
Never place the unit near gas appliances, fire or flammable liquids.
7.
Do not use an adapter or extension power cord or remove ground prong, and share the power outlet with other appli-
ances is also forbidden.
8.
Unplug air conditioner before servicing, but never turn off the unit by unplugging.
9.
Never dismantle, repair or modify the unit without authorization to avoid body injury or property damage. If there is any
unusual situation, like unusual noise, smell, smoke or electric leakage, be sure it repaired by manufacturer or profes-
sionals.
10. Never put any objects into the unit.
11. Never cover or obstruct air inlet or outlet to prevent overheating.
12. Never hit or shake the unit to prevent damage.
13. Never spray water or place the unit near water, and do not connect or disconnect the power plug with wet hands to
prevent electric shocks.
14. Need two or more people to remove and install air conditioner.
15. Please place this unit in even and dry surface. Make sure the air conditioner stay in upright position during the removal.
Keep the unit at least 50cm away from the walls or other objects. Ensure proper space interval of this unit including the
minimum distance from surrounding objects.
16. Unplug power cord if the unit will not be used for a long time.
17. Make sure windows and doors are closed during usage.
18. Make sure the power cord is placed in order to avoid people being tripped down.
19. Do not move the louver of air outlet by hand, in case the louver cannot cover the outlet after power-off.
20. Do not let skin and eyes face the cool breeze directly for a long time.
21. Do not put any stuff in air inlet and air outlet.
22. Do not scratch or damage the unit.
23. Do not clean the unit with water, use wet cloth instead.
24. Keep the unit at least 1 meter away from TV or radios to avoid electromagnetic interference.
25. Do not expose the unit under sun light directly, to avoid color fading of the surface.
26. Do not tilt the unit for more than 35 degrees or upside-down while transporting.
27. Place the unit on a flat surface and upright with less than 5 degrees inclination.
28. Keep the drain hose in good condition without flexure then connect with unit.
29. The unit operates more efficiently in certain room locations (Installation and Adjustment).
30. Empty the condensed drainage pan before putting the unit in storage to prolong the unit lifetime end of the season.
31. Do not use chemical solvents (e.g. Benzene, alcohol-glazer) to clean the unit surface. If it is dirty, please use neutral
solvents.
32. Make sure to cut off the power before disassembling or installing the filter.
33. Do not spray oil or water into the appliance.
34. Remark: Do not use this unit in cooling mode if the ambient temperature is higher than 35
temperature is lower than 7
o
C.
P.24
o
C or heating mode if ambient
Advertisement
Chapters
Table of Contents
