Installation Instructions - German pool PAC-10 Operating Instructions Manual

安裝說明
A.打開包裝
1. 打開包裝盒前，將主機直立放好。
2. 解開包裝帶。
3. 將紙箱向上取出。
4. 抓緊主機的兩側，輕輕從發泡膠底托取出。
5. 將放置於機內的排氣管鬆開並取出。
6. 冷氣機運作之前要安裝排氣管。
B.使用環境
- 確保本機在操作過程中不被任何物體阻礙。
- 切勿將本機放於陽光底下，以免機身過熱而
關閉。
- 由於本機會排出熱氣，切勿將本機放置於狹
窄的地方。
- 為安全起見及避免漏電，切勿將本機放置於
潮濕的地方。
- 為免機身退色，切勿將本機放置於被陽光直
射的角落。
註:
本機配備過熱關機保護裝置，以保障安全。
C.安裝排氣管 Installation of Exhaust Pipe
1
3
拉長底部
Stretch
5

Installation Instructions

取出排氣管蓋。
Remove exhaust pipe
cover.
將排氣管底部拉長。
Stretch one end of
exhaust pipe.
重新裝上排氣管蓋 (連排
氣管)。
Secure the exhaust pipe
cover together with the pipe.
A. Unpacking
1. Place the unit in the correct upright position
before unpacking.
2. Cut the two packing straps.
3. Slide the carton upwards to release it from the base.
4. Grip the handles located on both sides of the unit
and carefully lift until it slides out of the foam base.
5. Disconnect the tie-in inside the exhaust pipe
and take out the exhaust pipe.
6. Install the exhaust pipe before operating the unit.
B. Operating Environment
- Ensure the unit is not placed against objects which
will obstruct air intake, e.g. furniture or curtains.
- Do not place the unit in direct sunlight, as this
may cause the unit to overheat and turn off.
- Do not operate in a narrow place, since the
appliance will expel hot air.
- Do not operate in a humid environment, in order
to prevent power leakage.
- Do not place the appliance in a sunlit corner,
in order to prevent color fading.
Note:
The unit is fitted with a thermal cut off device
for safety protection.
2
45°
4
P.9
將接合器向左呈45度，
用力拉出排氣管。
Turn pipe connector
towards the left side until
it reaches 45°. Then pull
out exhaust pipe.
對準排氣管蓋圓形凹位，
順時針方向擰入排氣管。
Circumrotate exhaust pipe
in clockwise direction to
attach it into the circular
cavity of exhaust pipe cover.