Making A Call - Tait TM9300 User Manual

Making a call

70 Operating in conventional mode
Your radio may be programmed to activate
monitor whenever the microphone is off the
microphone clip.
Turning monitor on and off
1 Press Menu and select Radio settings >
Functions > Monitor.
(Depending on how your radio is programmed, you
may be able to press a function key to toggle
monitor on and off.)
2 Scroll to On (or Off) and press Select.
While monitor is on, the green LED flashes slowly
and the monitor icon
Your radio may be programmed so that monitor
turns off automatically after a short time.
1 Select the required channel or scan group.
You may need to select the zone you want first,
then select the channel or group from that zone.
2 Check that the channel is clear. If the green LED is
glowing, the channel is busy and you may not be
able to transmit.
3 Once the channel is clear (the green LED is off), lift
the microphone off the microphone clip.
4 Hold the microphone about 5 cm (2 inches) from
your mouth.
5 Press and hold the PTT key to transmit.
6 Speak clearly into the microphone and release the
PTT key when you have finished talking.
While you are transmitting, the red LED glows and
the transmit icon
appears in the display.
appears in the display.