AKCP sensorProbe8 User Manual page 27

SP2/SP8/SP8-X20 Manual
The User web interface login password is the same as the SNMPget community and the Admin is
the same as the SNMPset\get community string. You set your web interface login passwords in
the SNMP community settings by enabling the "Password checking" above then entering your
passwords into these fields.
Note the j on the end of the firmware version above. This confirms that the unit has the newer
mega256 memory chip. The SP2 with the newer mega256 memory chip allows you to separate
the SNMP communities from the web interface login passwords
Password Checking :- toggle whether the password is required or not
Use the same password for the web interface and SNMP: Ties the SNMP communities to the
web interface login passwords.
New User Password :- Type in the password for the user account
Confirm New User Password :- Confirm the new password for the user account
New Admin Password :- Type in the password you wish for the admin account
Confirm New Admin Password :- Confirm the new password for the admin account
Updated until firmware 413 - 27 -