Operate Scales; Weigh; Start Weighing - Seca 284 Operation Instructions Manual

5. OPERATE SCALES

5.1 Weigh

Start weighing

7. Confirm your selection with the Enter key (send/
print).
8. Use the arrow key (hold/zero) to select the "Yes"
setting.
9. Confirm your selection with the Enter key (send/
print).
The display "Auto" appears.
10. Use the arrow key (hold/zero) to enter the length of
the object.
11. Confirm the set value with the Enter key (send/
print).
The device is calibrated. You can perform height
measurements with the device.
1. Ensure that there is no load on the scales.
2. Press the Start key
display.
se[A
appears on the display, and then all the
display's elements appear briefly.
The scales are operational when the display reads
0. 0 0
.
3. Ask the patient to step onto the scales.
The patient's weight is displayed.
4. Read off the measured result.
English
of the multifunctional
Operate scales • 85