Page 1
767 Instruction manual and guarantee QuickMedical is an authorized distributor for seca. See the complete line of seca products at : www.medicalscales.com/seca Call toll free: 1-888-345-4858 Fax: 425-831-6032...
Page 2
In addition to the conventional determina- the service of health for over 150 years tion of weight, the seca 767 also has a now, and as market leader in many coun- function for determining body mass index.
– Place the holder in the battery compart- ment. – Close the cover and then turn the scale back up the right way. Note: the scale is prepared for use with a seca mains unit which is available as an accessory. Model 767...
4. Operation Controls and displays The controls and display are in the display part. Switch scale on and off s switch between kg and lbs press briefly s switch between kg and sts hold down s increase value, scroll in function menu s activate hold function press briefly s set display to zero, activate/deactivate tare function...
The scale automatically detects whether it is being operated on rechargeable batteries alone or whether it is connected to the mains. – With rechargeable battery operation: automatic shut-down after 30 seconds. – With mains operation: shut-down only via keypad. Model 767...
Taring weight display (TARE) The tare function is very useful, for example for determining the weight of a child, animal or other object placed on the scale in addition to yourself. Proceed as follows: – Press the green Start key. –...
– Read off the BMI on the digital display and compare it with the categories on page 20. – Press an arrow key if you would like to see the weight briefly. – To return to normal weighing mode, press the FUNC key. Model 767...
– To switch off the scale, press the Start key again. Evaluating Body Mass Index: Compare the value determined with the categories shown below. • BMI below 18: Warning, this patient weighs too little. There could be a tendency to anorexia. An in- crease in weight is recommended to improve well-being and performance.
Page 9
– Switch off the scale with the Start key and start the scale again. The scale will then work normally again. If this is not the case, disconnect the power supply by briefly removing the batteries. If this measure is equally unsuccessful, inform the Service department. Model 767...
7. Servicing Your seca scale leaves the factory with an accuracy greater than ± 0.25 %. To ensure that this accuracy is maintained, the product must be carefully set up and regularly maintained. Depending on the frequency of use, we recommend servicing every 3 to 5 years. Please ensure that a qualified service agent is used.
68- 32-10-243 Plug-in mains unit Use only seca original plug-in mains units with 9 V or controlled 12 V output voltage. Com- mercially-available mains units may supply a higher voltage than stated and thus lead to damage to the scale.
No further oured if the equipment is opened by per- claims can be entertained. The costs of sons not expressly authorised by seca to transport in both directions will be borne do so. by the customer should the equipment be...