Operate Scales In A Wireless Group; Activate Wireless Module (Sys); Set Up Wireless Group (Lrn) - Seca 376 Manual

7.2 Operate scales in a wireless group

......
rF
Autosend
......
Activate wireless
module (SYS)
Set up wireless group
52 •
All functions required to operate the device in a
seca wireless group can be found in the submenu "rF".
For information how to navigate in the menu see
page 46.
learn Group (ID)
• on
• off
• on
System
• off
• HI
• MA
Autoprint
• HI_MA
• off
• Year
• Month
• Day
Time
• Hour
• Minute
The device is supplied with the wireless module disa-
bled. It has to be activated before you can set up a
wireless group.
1. Switch the device on.
2. Select the menu item "SYS" in the "rf" submenu.
3. Confirm the selection.
4. Select "on".
5. Confirm the selection.
You will leave the menu automatically.
To set up a wireless group proceed as follows:
(Lrn)
1. Switch the device on.
2. Call up the menu.
3. Select the item "rF" in the menu.
4. Confirm the selection.
• Channel 1 (C1)
• Channel 2 (C2)
• Channel 3 (C3)
NOTE:
When the wireless module is activated, the
power consumption of the device will increase.
We recommend using a power supply unit
when operating the device in a wireless net-
work.
Stop Reg. Devices (M)