Switch Over Length Unit (Unit) - Seca 284 Operation Instructions Manual

Switch over length unit
106 •
You can select the unit (Unit) you wish to use for
(Unit) displaying the height.
NOTE
• Note and follow the national regulations
• Heights are transmitted to the control and are
1. Select the item "Unit" from the menu.
2. Confirm the selection.
The current setting is displayed.
3. Select the unit you wish to use for displaying length:
– Centimetre (cm)
– Feet and inches (ft:in)
4. Confirm the selection.
You will leave the menu automatically.
regarding units of measurement.
displayed in the unit set here.