Operating instructions SPIKE adaptive bike
16 Adapter & adaptation
Where necessary and ordered, a suitable
adapter for your wheelchair is included with the
delivery.
Please read the operating instructions and
assembly instructions "Adapter & adaptation"
before using the product.
The product may only be adapted and
detached on dry, stable and flat surfaces.
17 Functional elements
17.1 Parking stand
17.1.1 Active and passive positions
By pressing down and turning the operating
lever, the parking stand positions can be
changed from the active to the passive
position, or vice versa.
Figure 3: Press down and turn the operating lever
Figure 4: Parking stand in the active position
Figure 5: Parking stand in the passive position
17.1.2 Parking stand height adjustment
The height adjustment of the parking stand is
important in order to bring the docking plate of
the product into the correct (heigh) position to
the adapter.
For setting the height of the parking stand, the
following must be observed: the dimension
from the floor to the lower edge of the front of
the insertion maul (on the wheelchair side)
should correspond with the dimension from the
ground to the upper edge of the insertion bolt
(on the product side). As soon as there is a
deviation from these two dimensions due to the
hole pattern, the dimension from the ground to
the upper edge of the insertion bolt may be up
10