Components; Storage; Transport - ProActiv SPIKE Adaptive bike Operating Instructions Service Booklet

Operating instructions SPIKE adaptive bike
To the left:
Close brake
Figure 22: Parking brake can be operated from the
operating lever (opened)

17.6 Components

You will be instructed about the functions and
operation of the gears, brakes and other brand
components during the hand-over / training.
You can also get information later from the
component manufacturers' operating
instructions enclosed, or if needed, by asking
your dealer or PRO ACTIV. The operating
instructions from the component manufacturers
can also be downloaded online.
In the download area of
gmbh.com under the links "more
documents ", we have put together the most
>>
important documents. More extensive
information can be found on the
manufacturers' websites:
Shimano components:
http://si.shimano.com
Mountain Drive pedal bearing gear shift:
http://www.haberstock-
mobility.com/de/produkte/schlumpf-
getriebe/schlumpf-mountain-drive.html
Sigma:
http://www.sigmasport.com
Subject to changes to the links provided by the
component manufacturers.
To the right:
Open brake
www.proactiv-

18 Storage

Store the product on an easy to clean surface
in a dry environment, preferably at room
temperature (+15°C to +25°C).
For storage please also comply with the notes
in other sections of these operating instructions
and the component manufacturers' operating
instructions included with delivery.
If the product is not used or is stored over
a longer period, if necessary, before using it
again, we recommend having a dealer give it a
general function and safety check.

19 Transport

When loading or transporting, the product can
be held on the pedal bearing support.
When transporting in vehicles it must be
noted that the product is not approved for use
as a seat in vehicles or disabled person's
vehicles when combined with a manual
wheelchair. All vehicle occupants must only sit
on the seats installed in the vehicle during the
journey with the associated restraint systems.
Failing to observe this leads to increased risk
of injury for the user as well as for third-parties.
The product and all associated
components must be secured during transport
so that they are not damaged (e.g. by falling
over) and do not become a hazard to persons
or other products.
When loading make sure that the cables
and lines are not caught up, become kinked or
otherwise damaged. The product may not be
used with damaged cables and / or lines.
16