Table of Contents
Advertisement
Figure 1: Anti-roll back device
We recommend: The wheelchair should be
equipped with a wheelbase extension. Before
driving with the traction system, the wheelchair
wheels should then be positioned in the
wheelbase extension. This allows a more
optimised distribution of the weight between
the drive wheel of the product and the
wheelchair wheels to be achieved. This
minimises the risk of the product wheel slipping
on slopes.
Figure 2: Removable wheelbase extension
8
Technical specifications
8.1
Product weight
The total weight starts from 7.3 kg with the
basic equipment.
5
Operating instructions SPIKE adaptive bike
8.2
Load weight
Maximum load weight:
75 kg towing capacity and 5 kg payload
8.3
Obstacle height and turning circle
Maximum drive-over / negotiable obstacle
height: 10 cm (must be ensured through an
appropriate adapter assembly / setting,
steering wheels must be removed
( recommended equipment of the
wheelchair: steering forks with quick-release
axle))
Turning circle:
approx. 3.5 m without manoeuvring back
and forth
approx. 2.3 m with manoeuvring back and
forth (much dependent on the number of
manoeuvres)
8.4
Basic equipment & dimensions
In its basic equipment, the product comprises
one drive unit with docking plate, handles with
brake fittings, chain guard and rim brake.
Dimensions, SPIKE adaptive bike:
Product height: approx. 70-90 cm (depending
on the length of the pedal bearing support)
Product width: approx. 41-50 cm (depending
on the grip width, parking stand in passive
position)
Grip width: 36-45 cm
Crank length: 135-175 cm
8.5
Service life
The service life of the product is 6 years in
accordance with the medical products law.
Advertisement
Table of Contents
