Sledge; Glass Lid; Miscellaneous - Bang & Olufsen BeoSound 9000 MKIII Service Manual

SLEDGE

GLASS LID

MISCELLANEOUS

By using one of the fl at cables provided at the back of the service manual (type
252x - 3538847 or order no. 6277184) the display can be engaged by connecting
7P63 and 34P8.
In connection with test modes the CD has reduced operation.
If the clamper arm is not installed, no tacho pulses will come from the
autopositioning system, and the turntable motor may therefore run in the reverse
direction.
In connection with repair of the sledge function the following tips may be useful:
The wire for the sledge must be placed correctly; otherwise periodic errors may
occur.
The glass lid may be "pulled" out of mesh. The product has been designed in that
way in order to allow the customer to remove his CD's without switching on the
power supply to the product.
When replacing the top, the number label must be transferred to the new top.
Repair tips, English 5.19