Table of Contents
Advertisement
Connections
Master Link
Power Link
Audio Aux Link
Headphones
Digital output CD
Mains
Power frequency
Power consumption Stand.by
Power consumption
Specifi cation guidelines for service use
Pin 1
Data-, -0.5 V ±0.2 V in relation to Data+
Pin 2
Data+, +0.5 V ±0.2 V in relation to Data-
Pin 3
ML connect > 3 V
Pin 4-6
+supply voltage, +7 V to +15 V
(in stand-by +3 V to +15 V)
Pin 7-10
Not used
Pin 11
-supply voltage, -7 V to -15 V
(in stand-by -2 V to -15 V)
Pin 12
+supply voltage, +7 V to +15 V
(in stand-by +3 V to +15 V)
Pin 13
Audio L- in/out, 2 V Bal, in relation to Audio L+,
Rin 4.4 MW, Rout 150 Ω
Pin 14
Audio L+ in/out, 2 V Bal, in relation to Audio L-,
Rin 4.4 MW, Rout 150 Ω
Pin 15
Audio R- in/out, 2 V Bal, in relation to Audio R+,
Rin 4.4 MW, Rout 150 Ω
Pin 16
Audio R+ in/out, 2 V Bal, in relation to Audio R-,
Rin 4.4 MW, Rout 150 Ω
Shield
GND
Pin 1
Power up (ON = >2.7 V -1mA)
Pin 2
Signal GND
Pin 3
Audio L out 0 V to 2 V RMS
Pin 4
Speaker ON (ON = >2.7 V -1 mA)
Pin 5
Audio R out 0 V to 2 V RMS
Pin 6
Datalink out (High = >4 V, Low = <0.2 V)
Pin 7
Data GND
Pin 8
PL+ ON
Pin 1
Audio L out 1 V RMS, Rout 1 kΩ
Pin 2
GND
Pin 3
Audio L in 0.25 V RMS to 2 V RMS, Rin 47 kΩ
Pin 4
Audio R out 1 V RMS, Rout 1 kΩ
Pin 5
Audio R in 0.25 V RMS to 2 V RMS, Rin 47 kΩ
Pin 6-7
Not used
Ø 3.5 mm, 220 W
AES / EBU
IEC 958
0.5Vpp, 75W, 1%
Cable included
Type 2571, 2572, 2577, 2580 – 230V AC
Type 2573, 2576 – 120V AC
Type 2574 – 100V AC
Type 2575 – 240V AC
50-60 Hz
Typical 1.0W
Typical 15W
1.3
Advertisement
Table of Contents
