Mobile Phone Setting - Wansview X SERIES User Manual

2.2.3. Mobile Phone Setting

Install the iSmartViewPro App in android phone or iPhone at first，Open the App, access to More
interface, select "One key configure Wi-Fi" and fill in Wi-Fi SSID and password, and then click configure
to finish the setting as Figure3.
Tips:
 Before configuration, please power on the camera, after 5 minutes, you can configure the camera
(blue Wi-Fi indicator flash slowly),otherwise you can't configure, and must power on the camera
again;
 Move mobile phone speaker to camera MIC, click Configure;（please confirm if the camera have
MIC, otherwise the configuration will be unsuccessfully)
 After configuring successfully, the blue Wi-Fi indicator will flash several times quickly, and then
connect to router automatically and the blue indicator is always on. You can click Configure several
times when the configuration is unsuccessfully.
Figure2
Figure3
User manual
7 / 23