Network - Wansview X SERIES User Manual

5.1.2. Network

5.1.2.1. IP Address Setting
You can modify IP address of the camera etc, the default is DHCP,achieve automatically as
Figure15.
5.1.2.2. Port Setting
You can change webpage http port here as Figure16.
5.1.2.3. Wi-Fi Setting
Click Search, and switch on enable Wi-Fi, select the wireless router you want to connect, enter
password of the router, click Save to finish the Wi-Fi configuration. Click Test to test if it can be
connected to the router after finishing the configuration as Figure17.
Figure15
Figure16
User manual
13 / 23