Wansview X SERIES User Manual page 20

5.1.5.4. Linkage alarm setting
You can set up IO detect， motion detection and audio detect, it can linkage to trigger the action:
snapshot to Email or FTP server or SD card, recording to FTP server or SD card, and trigger IO output as
Figure32.
Tips: The usage for combination of alarm trigger in alarm trigger type:
For example, you enable the audio detection and motion detection, so the camera is enabled
combination of alarm trigger, it will perform the action in alarm action setting when the audio detect and
motion detection detect any change.
5.1.5.5. Protected duration setting
After setting up alarm detect type and alarm trigger linkage, you need to set up protected duration.
You must set up it, then the camera perform trigger linkage; the time format is 7 days, 24 hours per day,
15 minutes per a block as Figure33.
Figure32
Figure33
User manual
20 / 23