Valcom IP bold series Installation & Operation Instructions page 41

Time plan – when is not selected then 4th number is allways active. Usage of
4th phone number might be limited by time plan
Calling - allows create groups – via follow.
5th phone number- is phone number which is dial as fifth (when is used
progressive dial mode). 5th phone number will be dialled with
compliance to selected time plan and when is filled only.
Time plan – when is not selected then 5th number is allways active. Usage of
5th phone number might be limited by time plan
External relay code 1/2/3/4 – here insert priváte codes for code lock. The
code lock might be completed from door entry buttons (it is according
buttons 1 – 4 in TC model), or in TK models you can use keypad.
Each subscriber has one cod efor every relay.
Calling – description
The group means that 2 or more phone numbers creates group and those
Numbers are dialled simultaneously (all are ringing together). Who from dialled
Subscribers pick up first can talk and ringing to other subscribers in group
Will be ended.
Individualy – this phone number is dialled individualy. It is not in group with
any other number.
Group start – first phone number in group call
In group with previous – phone number in group. It is not first and also not
last.
Group end – phone number is last from the group
By this setting you can create for every subscriber up 2 groups or groups
with 5 numbers and make groups combination with individual phone numbers.
first phone number rings to operator – „Individualy"
EXAMPLE:
Second phone number is „Group start"
Thirth and fourth phone number is „in group with previous"
Fifth phone number is „Group end"
– Those four phone numbers ringing in office together where are picked
up by other subscribers when operator is busy. In offices phones start ringing
after adjustable time.
IP BOLD
- installation and operating instructions
41