Valcom VIP-801A Manual

INTRODUCTION
The VIP-801A Network Audio Port enables voice
access to a single zone of one-way paging over an
IP network, allowing page zones to be extended
anywhere network connectivity is available.
VIP-801A can be programmed as a SIP (Session
Initiation Protocol) device for connectivity to virtually
any Voice over IP (VoIP) telephone system.
SPECIFICATIONS
Features
 1 Audio Input
 2 Audio Outputs
 2 Form C Relays
 1 Contact Closure Input
 1 SIP identity for registering to a VoIP telephone
system
 RJ-45 jack for network connection
 Front panel activity LED
 Provides audio for up to 40 Valcom one-way
amplified speaker assemblies
 AUX audio input via RCA jack
 Contact closure or VOX operation of audio input
 Removable screw terminal connectors provided
for audio and relay interfaces
 AUX input music mutes during page
 Output control contact closure provided during
paging output
 Compatible with 25 or 70 Volt amplifiers
 Barrel jack for optional DC power
 Power over Ethernet (PoE) 802.3af compatible
Dimensions/Weight
 1.38 H x 6.13" W x 5.25" D
(3.50cm H x 15.6cm W x 13.33cm D)
 Weight: 1.25 lbs. (0.57 kg)
VIP-801A
NETWORK AUDIO PORT
The
1
Nominal Specifications
Input Impedance:
Input Level:
Voice Switch Sensitivity:
AUX Input Impedance:
AUX Input Level:
Output Impedance:
Output Level:
Relay Current:
Nominal Power Requirements
Via rear panel barrel connector:
Voltage:
Current:
Via 802.3af PoE Ethernet Switch:
802.3af:
Environment
Temperature:
Humidity: 0 to 85% non-precipitating
Packing List
Qty
1 VIP-801A
1 VSP Document
2 Mounting Brackets W/ Hardware
4 Rubber Pads
ISSUE 1
600 Ohms
-10dBm nominal
-21dBm
8 to 600 Ohms
-10dBm nominal
50 Ohms
- 10dBm nominal
1 Amp @ 24VDC
24VDC
325mA
Class 3
0 to +40° C
Item
947767