Troubleshooting Map - Canon LBP5300 User Manual

Troubleshooting Map

If any problem occurs while you are using the printer, follow the flow chart shown
below to check the problem.
The printer driver
fails to print.
Printing is
impossible.
An error message
7
appears on
the Printer Status
Print quality
deteriorates.
Paper Problems
(See "Paper Problems," on
p. 7-45)
7-2 Troubleshooting Map
Downloaded from ManualsPrinter.com Manuals
Yes
No
Yes
No
Follow the messages
Yes
displayed on the Printer Status
Window to remedy an error.
(See "Printer Status Window,"
Window.
on p. 5-90)
No
Yes
Toner density is set to light.
(See "Printing with Toner
Density Adjusted," on p. 5-67)
No
Toner runs low.
(See "Replacing Toner
Cartridges," on p. 6-2)
The printer is installed in an
adverse environment.
(See "Installation Site," on p.
2-3)
Other Problems
(See "Print Quality Problems,"
on p. 7-34)
The printer driver is not installed
properly.
(See "Installation Problems," on p. 7-50)
The (Alarm) indicator is on or
blinking.
(See "The Alarm Indicator is
On/Blinking," on p. 7-30)
The (Load Paper) indicator is on or
blinking.
(See "Loading Paper in the Paper
Cassette," on p. 3-17, "Loading Paper
in the Multi-purpose Tray," on p. 3-33)
The power cord is not connected.
The power switch is turned OFF.
(See "Turning the Printer ON/OFF," on
p. 2-33)
The printer is not connected to your
No
computer.
(See "Connecting to a Computer," on
p. 2-28)
No
The printer driver is not installed
properly.
(See "Installation Problems," on p. 7-
47)
No
No
No
No
No