Troubleshooting Map - Canon Laser Shot LBP3300 User Manual

Troubleshooting Map

If any problem occurs while you are using the printer, follow the flow chart shown
below to check the problem.
The printer driver
fails to print.
Printing is
impossible.
7
An error message
appears on the Printer
Status Window.
Print quality
deteriorates.
Paper Problems (See "Paper
Problems," on p. 7-36)
7-2

Troubleshooting Map

Yes
No
Yes
No
Follow the messages
Yes
displayed on the Printer Status
Window to remedy an error.
(See "Printer Status Window,"
on p. 4-81)
No
Yes
Toner density is set to light.
(See "Printing with Toner
Density Adjusted," on p. 4-61)
No
Toner runs low. (See
"Replacing the Toner
Cartridge," on p. 5-2)
The printer is installed in an
adverse environment. (See
the Getting Started Guide)
Other Problems (See "Print
Quality Problems," on p. 7-32)
The printer driver is not installed
properly. (See "Installation Problems,"
on p. 7-38)
The (Alarm) indicator is on or blinking.
(See "Alarm Indicator," on p. 7-3)
The power cord is not connected.
The power switch is turned OFF.
(See "Turning the Printer ON/OFF," on
p. 1-10)
The printer is not connected to your
computer. (See "Connecting to a
Computer," on p. 1-13)
The printer driver is not installed
properly. (See "Installation Problems,"
on p. 7-38)
No
No
No
No
No
No