Canon LBP5300 User Manual page 411

The displayed color and printed color differ when printing photos, etc.
Cause
Remedy 1 Set [Matching Method] to [Perceptual [Monitor Color Matched]] in the printer
Remedy 2 Adjust [Gamma] in the printer driver.
Streaks appear in the gradated portions when printing diagrams with gradations.
Cause
Remedy
7
Data is not printed in the correct color (specified color) even after specifying the same color
for a filled-in pattern and its border.
Cause
Remedy
The back of the printed paper has smudge marks.
Cause
Remedy
7-46 Print Quality Problems
Downloaded from ManualsPrinter.com Manuals
The method for adjusting color on the screen (RGB) and in the printer (YMC) is
different. Therefore, there may be cases when the color on the screen cannot
be printed out exactly as it appears.
driver.
In order to specify the setting for [Matching Method], display the [Matching]
sheet by selecting the [Manual Color Settings] check box in the [Quality] sheet,
and then clicking [Color Settings].
In order to specify the setting for [Gamma], display the [Matching] sheet by
selecting the [Manual Color Settings] check box in the [Quality] sheet, and then
clicking [Color Settings].
[Use Pure Black] is applied to the gray color portions of the "streaks" in the
diagrams.
Set [Use Pure Black] to [Never] in the printer driver.
In order to specify the setting for [Use Pure Black], display the [Custom
Settings] dialog box by clicking [Settings] in the [Quality] sheet.
A special process may be applied depending on the line width of the border so
that thin lines are printed clearly.
Adjust the setting for [Gamma] in the printer driver.
In order to specify the setting for [Gamma], display the [Matching] sheet by
selecting the [Manual Color Settings] check box in the [Quality] sheet, and then
clicking [Color Settings].
The size of the print data was larger than that of the loaded paper.
Check if the size of the print data matches that of the loaded paper.