Power Supply - Canon LBP5300 User Manual

Power Supply

WARNING
Do not damage or modify the power cord. Also, do not place heavy objects on the
•
power cord, or pull on or excessively bend it, as this could cause electrical damage
and result in a fire or electrical shock.
Keep the power cord away from a heat source; failure to do this may cause the power
•
cord coating to melt, resulting in a fire or electrical shock.
Do not plug or unplug the power plug with wet hands, as this may result in electrical
•
shock.
Do not plug the power cord to a multiplug power strip, as this may cause a fire or
•
electrical shock.
Do not bundle up or tie the power cord in a knot, as this may result in a fire or
•
electrical shock.
Insert the power plug completely into the AC power outlet, as failure to do so may
•
result in a fire or electrical shock.
Do not use power cords other than the power cord provided, as this may result in a
•
fire or electrical shock.
As a general rule, do not use extension cords or plug extension cords to a multiple
•
power strip. If extension cords must be used or plugged to a multiple power strip,
however, use them observing the following points on user's own authority. If you use
extension cords improperly, this may result in a fire or electrical shock.
- Do not connect one extension cord to another.
- Make sure that the voltage of the power plug is the one indicated in the rating label
(attached on the back of the printer) when you use the printer.
- Use an extension cord that allows the current value greater than the necessary one
indicated in the rating label (attached on the back of the printer).
- When you use an extension cord, untie the cord binding, and insert the power plug
completely into the extension cord outlet to ensure a firm connection between the
power cord and the extension cord.
- Periodically check that the extension cord is not overheated.
CAUTION
Do not use power supplies with voltages other than those specified herein, as this
•
may result in a fire or electrical shock.
Always grasp the plug when unplugging the power cord. Pulling on the power cord
•
may expose or snap the core wire, or otherwise damage the power cord. If the power
cord is damaged, this could cause current to leak, resulting in a fire or electrical
shock.
Leave sufficient space around the power plug so that it can be unplugged easily. If
•
objects are placed around the power plug, you will be unable to unplug it in an
emergency.
xx
Downloaded from ManualsPrinter.com Manuals