Troubleshooting Map - Canon Laser Shot LBP5200 User Manual

Troubleshooting Map

If any problem occurs while you are using the printer, follow the flow chart shown
below to check the source of the problem.
Cannot use
the printer driver
Cannot print
7
An error is
displayed in the Printer
Status Window
The printing
quality is low
Paper problems
➞Chapter 7: Paper Problems
(p.7-38)
7-2

Troubleshooting Map

Yes
No
Follow the direction in the
message displayed in the
Printer Status Window
➞Chapter 4: Printer Status Window
(p.4-72)
The toner density is set too thin
➞Specifying the Print Quality
(p.4-56)
The toner is running out
➞Chapter 5: Replacing Toner
Cartridges (p.5-6)
The installation environment is bad
➞ Getting Started Guide
Other problems
➞Chapter 7: Print Quality Problems
(p.7-30)
The printer driver is not installed
correctly
➞Chapter 7: Installation Problems (p.7-41)
The Alarm lamp is on or flashing
➞Chapter 7: Alarm Indicator (p.7-3)
The power cord is not connected
The power switch is turned off
➞Chapter 1: Turning the Printer On and Off
(p.1-11)
The printer is not connected to the computer
➞Chapter 1: Connecting to a Computer (p.1-13)
The printer driver is not installed
correctly
➞Chapter 7: Installation Problems (p.7-41)