Canon LBP5300 User Manual page 410

Cause 4
Remedy
NOTE
• When you select [Print Priority] from [Operation Immediately after Power ON] in [Device
Settings] in the [Options] menu in the Printer Status Window, calibration will be
performed at the completion of the first printing after the printer is turned ON. (See
"Performing Calibration Immediately after the Printer is Turned ON," on p. 6-21)
• If you want to perform calibration manually, see "Performing Calibration Manually," on p.
6-18.
The colors of thin lines or filled-in patterns are different from the specified colors, or do not
appear at all.
Cause 1
Remedy 1 Adjust the colors in the application and print again.
Remedy 2 Change the patterns in the application and print again.
Cause 2
Remedy 1 Readjust to a darker color and print again.
Remedy 2 Reload paper to change the feeding direction, then print again.
Fill-patterns are not printed in the correct color (specified color).
Cause
Remedy 1 Print again without specifying a fill-pattern in the application.
Remedy 2 Set [Color Halftones] or [B & W Halftones] to [Gradation] or [Color Tone] in the
Downloaded from ManualsPrinter.com Manuals
Data was sent before completing calibration, such as when the printer was first
turned ON.
Make sure that calibration is completed before sending data to the printer.
Some colors cannot be reproduced due to the combination of colors or
patterns.
The color may appear different depending on the fill-pattern.
The fill-pattern of the print data and the dither pattern of the printer are
interfering with one another.
printer driver.
In order to specify the setting for [Color Halftones] or [B & W Halftones], display
the [Custom Settings] dialog box by clicking [Settings] in the [Quality] sheet .
Print Quality Problems
7
7-45