When Data Is Not Sent To The Printer; When The Printer And Computer Are Connected By A Usb Cable - Canon LBP5300 User Manual

Hide thumbs Also See for LBP5300:
Table of Contents

Advertisement

When Data is Not Sent to the Printer

NOTE
When the printer and computer are connected by a LAN cable, see "Chapter 4
Troubleshooting" in Network Guide.
When the Printer and Computer are Connected by a USB
Cable
The following are probable causes when the printer and computer are connected
by a USB cable, and the data cannot be printed because it is not sent to the printer.
Take the appropriate measures.
The printer is not turned ON.
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy
Cause 4
Remedy
The USB cable is not connected properly.
Cause 1
Remedy
Downloaded from ManualsPrinter.com Manuals
The power plug is unplugged from the AC power outlet.
Plug the power plug into the AC power outlet.
The printer is plugged to an extension cord or multiple power strip.
Plug the power plug of the printer directly into an AC power outlet on the wall.
The breakers have tripped.
Reset the breakers on the switch board.
There is a break in the power cord.
If the printer is turned ON after replacing the power cord with the one that is of
the same type and is used for other device, there is a break in the power cord.
In this case, purchase a new power cord and replace it with the broken one.
The USB cable is disconnected.
Make sure that the printer and computer are connected with the USB cable
properly.
When Data is Not Sent to the Printer
7
7-61

Advertisement

Table of Contents
loading

Table of Contents