Alignment Parameters - OEM VKP80III User Manual

10. ALIGNMENT

10.3 Alignment parameters

The "alignment point" is defi ned as the position inside the ticket to use for the notch alignment. If you use paper with
perforation (FanFold modules), the alignment point corresponds with the edge of the ticket.
The distance between the notch edge and the alignment point is defi ned as "Notch Distance".
Referring to the front of the notch, the value of "Notch Distance" varies according to emulation set:
- VKP80III emulation:
- VKP80II emulation:
If the "Notch Distance" value is set to 0, the alignment point is set at the beginning of the notch.
alignment point
positive values of "Notch Distance"
The following fi gure shows an example of paper with alignment point set by a positive value of "Notch Distance"
("Notch Distance" = + A):
alignment point
88 VKP80III
User Manual
"Notch Distance" value varies from -5mm minimum and 99.9mm maximum
"Notch Distance" value varies from 0mm minimum and 32mm maximum.
+
+A
0
alignment point = notch front
alignment point
-
0
negative values of "Notch Distance"
notch front
PRINTING DIRECTION
PRINTING DIRECTION