Installation; Fastening - OEM VKP80III User Manual

3

INSTALLATION

3.1 Fastening

The printer is provided with three fi xing holes on the bottom of device (see following fi gure). To fasten the printer on
a panel, use three M4 screws
E
It's very important to consider the screws length to not damage the internal components placed near the fi xing holes
(see following fi gure).
The screw length (L) will be calculated according to the thickness of the panel (SP) on which the printer is fi xed, as
follows
For example, if panel thickness is 10mm ( Sp = 10mm ) the max screw length will be 23mm.
9,5 85,5
Section E-E
L ≤ 13mm + Sp
printer chassis
fixing panel
fixing screw
User Manual
3. INSTALLATION
E
VKP80III 17