6. MAINTENANCE
6.2 Cleaning
For periodic cleaning of the printer, see the instructions below.
CUTTER COMPARTMENT
1
Disconnect the
power supply cable.
2
Lift the magnetic bulkhead
that closes the cutter compartment.
3
ATTENTION:
Do not use alcohol, solvents, or hard brushes. Do not let
water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
Alcohol, solvent
cohol, solve
Remove any scraps of paper and the accumulated
paper dust from the cutter compartment.
46 VKP80III
User Manual
4
to close the cutter compartment.
ON
Lower the bulkhead