OEM VKP80III User Manual page 42

5. CONFIGURATION
USB VIRTUAL COM
PRINT MODE
AUTOFEED
CHARS / INCH
SPEED / QUALITY
PAPER RETRACTING
PRINT WIDTH
PAPER THRESHOLD
42 VKP80III
User Manual
Setting the USB port as a virtual serial port:
Disabled D = Virtual COM disabled
Enabled = Virtual COM enabled
NOTE: The parameter is printed only with VKP80III emulation enabled
Printing mode:
D
Normal = enables printing in normal writing way
Reverse = enables printing rotated 180 degrees
NOTE: The parameter is printed only with VKP80III emulation enabled
Setting of the Carriage Return character:
CR disabled D = Carriage Return disabled
CR enabled = Carriage Return enabled
Font selection:
A = 11 cpi, B = 15 cpi
D
A = 15 cpi, B = 20 cpi
A = 20 cpi, B = 15 cpi
NOTA: CPI = Characters Per Inch
Setting of printing speed and printing quality:
High Quality
Normal D
High Speed
Setting of the "retract" function of the paper, with paper presence on ejector during
power-up:
D
Disabled = "retract" function disabled
Enabled = "retract" function enabled
NOTE: The parameter is printed only with VKP80II emulation enabled.
Width of printing area:
48 mm 58 mm
50 mm 60 mm
52 mm 62 mm
54 mm 64 mm
56 mm 66 mm
NOTE: The parameter is printed only with VKP80III emulation enabled. With VKP80II emulation enabled,
the printing width is fi xed to 76mm.
Threshold value (in percent) for the recognition of the presence of paper by the paper
presence sensor:
30% 70%
40% D 80%
50% 90%
60%
NOTE: The parameter is printed only with VKP80III emulation enabled.
68 mm 78 mm
70 mm 80 mm
72 mm
74 mm
76 mm D