OEM VKP80III User Manual page 56

7. SPECIFICATIONS
Paper width
Paper weight
Recommended types of paper
Paper end
External roll diameter
(6)
Internal roll core diameter
Core type
CUTTER
Paper cut
Estimated life
(2)
ELECTRICAL SPECIFICATIONS VKP80III
Power supply
Medium consumption
(5)
Stand-by consumption
ELECTRICAL SPECIFICATIONS POWER SUPPLY cod.963GE020000003 (OPTIONAL)
Power supply voltage
Frequence
Current (output)
Power
ENVIRONMENTAL CONDITIONS
Operating temperature
Relative humidity
Storage temperature
Storage relative humidity
NOTES:
: Control board
(1)
(2) : Respecting the regular schedule of cleaning for the device components.
: "Veramono.ttf" and "Vera.ttf" are installed on printer fl ash disk.
(3)
: You can print the formats of bidimensional barcode (PDF417, DATAMATRIX, AZTEC, QRCODE) only with the
(4)
VKP80III emulation enabled.
: Referred to a standard CUSTOM receipt (L = 10cm, Density = 12,5% dots on).
(5)
(6) : For external rolls diameter higher to Ø120mm it's recommended to use a paper pretensioning device.
56 VKP80III
User Manual
from 50 mm to 82,5 mm
from 60 g/m
KANZAN KF50, KP460 and KP390
MITSUBISHI PF5075, TL4000 and TF1067
not attached to roll core
1 000 000 cutter number
24 Vdc ±10% (optional external power supply)
from 100Vac to 240Vac
from 10% Rh to 80% Rh
from 10% Rh to 90% Rh
to 110 g/m
2 2
max 180 mm
25 mm
Cardboard or plastic
total
1 A
0,04 A
from 50Hz to 60Hz
24 Vdc ± 10%
60 W
from 0°C to +50°C
from -20 °C to +70 °C