Protecting The Environment; Installer Checklist To Be Completed By Installer; Upon Installation - Bosch Greentherm 9800 SE 160/199 Manual

Indoor residential and comme rcial tankless water heaters
Table of Contents

Advertisement

62 | Protecting the environment

13
Protecting the environment
Packing
The packing box may be fully recycled as confirmed by the
recycling symbol
.
Components
Many parts in the heater can be fully recycled at the end of the
product life. Contact your city authorities for information about
the disposal of recyclable products.
Saving water resources:
▶ Make sure you close all the taps after any use. Avoid leaving
the taps dripping. Repair any leaking tap.
▶ Define the temperature you want, in the appliance or with
the remote control. This way you have the precise water
flow needed (mixing cold water to regulate temperature
will increase the water flow with consequent waste of
water).
6 720 816 815 (2016/10)
14
Installer Checklist to be completed by
installer upon installation
1)
Serial Number
2)
Gas Pressure Reading
Static
Dynamic
Water Pressure
Building Water Pressure
Pressure Range if on Well
system
Installing Company
Installer name
Address
Phone
Table 27
1) Serial number is located on the rating plate which is
located on the right side of the appliance cabinet.
2) See Chapter 4.13 and gas pressure table (to be filled out
by installer).
Installation manual should be left with the
owner after the installation is tested and
completed. Additional copies of the
installation manual are available at
www.boschheatingandcooling.com.
Greentherm 9800 SE 160/199 | SEC 199
___ ___ ___ ___ ___ ___ ___ ___

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents