Bosch Greentherm 9800 SE 160/199 Manual page 41

▶ Touch the symbol
After 2 sec. the fan starts working to purge the exhaust
circuit.
The fan remains running until the Purge menu
is exited, to do so:
▶ Touch the symbol
6.5.3 SA - Settings
Only to be use when domestic recirculation is installed.
Fig. 39 SA - Settings
This menu provide access to several parameters.
▶ Access to information / adjustments menu.
Display shows P4 Information.
▶ Touch the symbol
Settings.
▶ Touch the symbol
Display shows A0 Clock/Date.
▶ Use the symbols
information/adjustments menus.
– A0 Clock/Date
– A1 Recirculation
– A2 Vacations
– A3 Language Set
– A4 Demonstration
– A5 Reset Appliance
– A6 Display Position
– A7 Wireless Connectivity
– A8 Startup Delay
– A9 Units Set
– AA Display Timeout
– AB Region Selection
▶ Touch the symbol
A0 Clock/Date
Set the time:
▶ Touch the symbol
Display shows Clock and Date menu.
▶ Touch the symbol
Greentherm 9800 SE 160/199 | SEC 199
until the display shows P9 Purge.
.
until the display shows SA
.
or to scroll through the
to select the desired information.
.
to set the Clock.
▶ Use the symbols
▶ Touch the symbol
▶ Use the symbols
▶ Touch the symbol
▶ Use the symbols
▶ Touch the symbol
Set the Date:
▶ Use the symbols
Display shows Date menu: MM / DD / YYYY.
▶ Touch the symbol
▶ Use the symbols
▶ Touch the symbol
▶ Use the symbols
▶ Touch the symbol
▶ Use the symbols
▶ Touch the symbol
▶ Touch the symbol
Clock and Date are defined.
▶ Touch the symbol
and exit menu.
A1 Recirculation
Recirculation program is to control when a domestic
recirculation system is active.
Set recirculation program:
▶ Touch the symbol
Display shows following menu.
– HR House Recirculation
– TL Tank Loading
– OFF Off
HR House Recirculation
Set the Schedule:
▶ Touch the symbol
▶ Touch the symbol
Display shows week days.
▶ Touch the symbol
▶ Use the symbols
▶ Touch the symbol
▶ Use the symbols
hour.
▶ Touch the symbol
▶ Use the symbols
▶ Touch the symbol
A recirculation period is defined.
The user can add additional recirculation periods on the
same day.
▶ Touch the symbol
steps mentioned above.
Operating Instructions | 41
or to set the hours.
when hour is correct.
or to set the minutes.
when minutes are correct.
or to choose a.m. or p.m.
to exit the Clock menu.
or to choose the Date menu.
.
or to set the month.
when month is correct.
or to set the day.
when the day is correct.
or to set the year.
when the year is correct.
to exit the Date menu.
, the Hours and Clock blink 3 times
.
, to select Schedule.
, to enter the programming menu.
, to select a week day.
or to choose option Add New.
, to enter the recirculation program.
or to choose the beginning
, to set the beginning hour.
to choose the end hour.
, to set the ending hour.
, to select Add New and repeat all
6 720 816 815 (2016/10)