Sym PA12B Service Manual page 140

To this chapter contents
9. Crankshaft / Crankcase / Transmission / Kick Starter
Tighten crankcase right side screws and
Screw ×1 Bolt ×1
clutch wire holder.
Torque value：0.8~1.2kgf-m
Coat grease to the new counter shaft oil seal
and assemble the left crankcase.
Install the cam chain.
Install the cam chain tensioner arm (boltx1).
Install the neutral switch.
Bolt ×1
Screw ×1
9-15