1.Content 1. Contents ..........................1 2. Control Location ........................3 3. Before Riding ........................4 4. Safe Riding .......................... 4 5. Driving ..........................5 6. Use Genuine Spare Parts ....................5 7. Use of Each Component ....................6 ...................... 6 Multi-Function Display Meter .....................
1.Content ...................... 22 Checking the Brake Light ....................22 Checking for Fuel Leakage ............22 Checking the Lubrication of Body’s Various Mechanisms ....................... 22 Checking the Spark Plug ......................22 Cooling system inspection ......................23 Replenishment of coolant ..... 23 A reference table for anti-freeze concentration percentages under different temperatures ......................
For a more comfortable and safety riding, please read this manual carefully. For your benefit, please ask your SYM dealer the operating manual and carefully read the following: • Correct use of the scooter. • Pre-delivery inspection and maintenance.
Also, it may result in unexpected troubles and lower the scooter’s performance. • Always use SYM Genuine Spare Parts to keep your scooters pure blood and to ensure its long service life.
7.Use of Each Component 7. Use of Each Component (The following is SYM 4 stroke liquid cooling scooter’s basic operation, and they could vary from different individual models. Please consult the end of this manual.) Multi- Function Display Meter Speedometer...
Page 8
It displays the condition of the EFi system is working correctly. If there is any problem on the EFi system, the warning indicator will remain on all the time or does not come on. Please contact with a SYM dealer to check the self-diagnosis system or electrical connections. • Oil Check indicator Oil Check indicator is for showing engine oil inspection / replacement time.
7.Use of Each Component OPERATION OF IGNITION SWITCH IGNITION SWITCH "Start" position • Engine can be started in this position. • Ignition switch key can not be removed. "Stop" position • Engine is shut off and can not be started in this position . •...
Page 10
7.Use of Each Component When this button is shifted, all four indicators (front and rear-right and left) begin to blink simultaneously, and direction indicators on the instrument panel also flash at the same time. But when winker switch is operated in this condition, it will return to signal flash function in order of precedence.. When you are experiencing a sudden vehicle problem in the middle of traffic or the vehicle has broken down, switch on the lights and slowly pull over, keep the lights flashing till the problem is solved.
7.Use of Each Component • Turn Signal Switch Turn signal lights are used when turning left/right or changing lane. Turn ignition switch to “ON”, and slide the turn signal switch to left or right. Then, the turn signal lights will flash.
7.Use of Each Component FUEL TANK CAP 1. Insert ignition switch key into the ignition switch, and turn the key to the left, then the cap can be opened automatically. 2. Do not fill above the fuel upper limit when refueling. 3.
Page 13
7.Use of Each Component 8.Important Points and Cautions for Starting ENgine CBS model ABS model For Front Wheel And For Front Wheel Rear Wheel For Rear Wheel For Front Wheel 《Engine Brake》 Return the throttle grip back to its original position, and apply engine brake. It is necessary to apply both brake and engine brake intermittently when riding on a long or stiff slope.
8.Important Points and Cautions for Starting ENgine CAUTION: • If engine can not be started after starter motor running for 3~5 seconds, wait a few seconds, and try again. • In order to avoid damaging the starter motor, please do not press the starter button continuously over 15 seconds.
9.The Best Way to drive off 9. The Best Way to Drive off THE CONTROL OF THROTTLE HANDLE GRIP Acceleration : To increase speed. When riding on Deceleration an inclined road, turn the throttle handle grip slowly to allow the Acceleration engine to output its power.
• Install the drain bolt and tighten it. Fill new transmission oil (90~100 cc.), and install the infusion bolt and tighten it. (make sure that bolts are tightened and check that there’s no leakage.) ※ Recommend Gear Oil: SYM Genuine “SYMOIL” series Gear Oil (SAE10W-30/SAE85W-90). INSPECTION AND ADJUSTMENT OF BRAKE FREE PLAY INSPECTION: (Brake lever free play must be checked with the engine shut off.)
10.Inspection and Maintenance Before Riding DISK BRAKE INSPECTION (Applicable for model equipped with disk brake.) (Leak, damaged, looseness of brake line) Hose connection • Visual check brake lines for leakage, or damage, check brake lines connections for looseness using a wrench or similar tool, and check whether steering handle vibration in driving, or any parts' interference may have damage the brake lines.
10.Inspection and Maintenance before Riding CAUTION: • To prevent chemical reaction, please do not use brake fluids other than those recommended. • Do not fill above the upper limit when adding brake fluid and avoid dropping on painting or plastic components to prevent damage.
10.Inspection and Maintenance Before Riding INSPECTION AND MAINTENANCE OF BATTERY • This scooter is equipped with a maintenance-free type battery, so it is unnecessary to check and add electrolyte. Have your scooter checked by SANYANG Authorized Dealer or Franchised Dealer should any abnormality is found.
• Check steering handle if it is being pulled too tight by the brake cables. • Take your scooter to SYM Authorized Dealer or Franchised Dealer for a check or adjustment if any abnormal conditions are found.
10.Inspection and Maintenance Before Riding REAR CUSHION HARDNESS SETTING The rear cushion is 5 stage adjustable type. It’s set at 3th stage when manufactured, and you can adjust it depending on your need. Turn the adjust collar of the cushion to adjust it’s hardness. CAUTION: •...
10.Inspection and Maintenance before Riding CHECKING THE FRONT AND REAR LIGHTS • Start engine and turn on the head lamp switch. Check if head lamp and rear lamp come on. • Check the brightness and direction of front light by wall to see if it is correct. •...
• To avoid radiator getting rusty, do not use coolants other than those recommended. Coolant recommended: SYM radiator agent Concentration: 50% Radiator capacity: Main radiator : 780 c.c. Surge tank : 420 c.c.
10.Inspection and Maintenance before Riding CHECKING THE AIR CLEANER Screw 《DISASSEMBLE PRCEDURE》 1. Remove mounting screws from air cleaner cover. 2. Remove the air cleaner cover, then remove filter element. 3. Take the element out and clean it. (Refer to maintenance schedule.) 《ASSEMBLE PRCEDURE》...
“ ”.RUN position.? the fuse may have been blown. 【Have your scooter checked by SYM authorized dealer or franchised dealer immediately if there are no problems with the above items and engine still can not be started.】...
14. TRANSMISSION OIL • Recommended Oil: SYM Genuine “SYMOIL” GEAR OIL (SAE 85W-140) 15. CAUTIONS FOR RIDING SCOOTER 1. Raise the scooter with the main stand, and sit on the saddle.
☆ The above maintenance schedule has to be done if either mileage or duration had reached its designated maintenance criteria . If any problem or question raised about your scooter, please contact your SYM authorized dealer regardless the service schedule.
17.Specification 17. Specification Model LF12W4-EU LF18W3-EU Item Specification 2,100mm length 760 mm width 1,410 mm Height 1,440 mm Wheel base 161 kg 164 kg Net Weight 4- stroke 4V electroplated ceramic cylinders engine Type UNLEADED(OCTANE 92 OR HIGHER) Fuel Water-cooled Cooling type 124.9 cc 175.3 cc...
18. Postscript 18. Postscript Anti-lock brake system ABS is designed to help prevent the wheel from locking up when hard brakes are applied while running straight. The ABS automatically regulates brake force. Intermittently gaining gripping force and braking force helps prevent wheel lock-up and allows stable steering control while stopping. Brake control function is identical to that of a conventional motorcycle.
Page 31
SANYANG MOTOR CO.,LTD. NO.3 Chung Hua Road, Hukou, Hsinchu,Taiwan R.O.C. T 03-598-1911 F 03-598-1844 E SERVICE@sym.com.tw W http://www.sym-global.com/...