Installing The Docking Board - Dell Latitude 14 Rugged - 5414 Owner's Manual

b. base cover
3. To remove the docking board:
a. Disconnect the antenna cables from the docking board [1].
CAUTION: Exercise caution while disconnecting the antenna cables. Improper removal
may result in damage/breakage of the antenna cables.
b. Unroute the antenna cables [2].
c. Remove the screws that secure the docking board to the computer [3].
d. Flip the docking board [4].
e. Lift the release tab [5].
f. Disconnect the docking board connector cable from the system board [6].
4. Lift and remove the docking board from the computer chassis.

Installing the docking board

1. Connect the docking board connector cable to the system board.
2. Place the docking board on the slot.
3. Tighten the screws to secure the docking board to the computer.
4. Route the antenna cables.
5. Connect the antenna cables to the docking board.
6. Install the:
a. base cover
b. battery
7. Follow the procedure in After working inside your computer.
27