Using The Flash Upload Packet - Paxar 9402 Reference Manual

Nominal Width
Nominal Height
Inter-Character
Gap
Printhead Density
U s i n g t h e F l a s h U p l o a d P a c k e t
Use the flash upload packet to check the contents of flash
memory.
Syntax
1. header
2. packet#
3. action
Example
Selects all the formats in flash memory and uploads the
information.
2-36 Configuring the Printer
Average width for lower-case letters.
Average height for lower-case letters.
Default spacing between characters in
monospaced fonts.
Displays whether a 203 (0) dpi or 300 (1) dpi
printhead is used.
The scalable font (font 50) is not available for
all printers and it does not display which
printhead (203 dpi or 300 dpi) is used.
{header,packet#,action p }
Identifies the packet. Options:
A Check Digit Scheme
F Format
G Graphic
Identification number of the packet. Use 0 to upload all
packets.
Enter H to upload flash information.
{F,0,H p }