Paxar 9402 Reference Manual page 126

G3. action
G4. device
G5. units
G6. row
G7. column
G8. mode
G9. "name"
Example
Adds a graphic image identified by number 99 to volatile RAM.
The graphic uses dot measurement. The image will be placed
according to the row and column parameters in the graphic field.
The imaging mode is 0 and the image is called 99Wire.
5-14 Creating Graphics
Enter A to add the graphic to the printer.
Graphic storage device. Options:
F Flash
N Non-volatile RAM (9850)
R Volatile RAM
T Temporary storage
NOTE: Graphics stored in flash are saved when the printer is
turned off.
Unit of measure. For bitmapped graphics, G (dots) is the only
valid option.
Distance between the bottom of the graphic image area and
the first bitmap line. This is usually 0, unless you want a fixed
amount of white space around the graphic image. See
"Positioning the Graphic Image," for more information.
Printer Unit of Measure
English (1/100 inch)
9403
Metric (1/10 mm)
203 dpi Dots
9825/ English (1/100 inch)
985x/ Metric (1/10 mm)
9860 203 dpi Dots
English (1/100 inch)
985x/
Metric (1/10 mm)
9860
300 dpi Dots
Distance between the left edge of the graphic image area and
the left edge of first bitmap line. This is usually 0, unless you
want a fixed amount of white space around the graphic image.
See "Positioning the Graphic Image," for more information.
Use the previous table for values.
Imaging mode. Enter 0.
Graphic name (optional), 0-8 characters, enclose within
quotation marks.
{G,99,A,R,G,0,0,0,"99Wire" p
Row or Column or
End Row End Column
0-599 0-199
0-1523 0-507
0-1217 0-405
0-1599 0-399
0-4063 0-1015
0-3247 0-811
0-1199 0-399
0-3047 0-1015
0-3599 0-1199