Entering Batch Data For Qr Code - Paxar 9402 Reference Manual

E n t e r i n g B a t c h D a t a f o r Q R C o d e
QR Code requires certain parameters at the beginning of all batch
data.
Syntax
error_cor Level of error correction. Some damaged bar codes may still
be scannable if the error correction is high enough. Options:
NOTE: As you increase the error correction level, the
mask# Mask number. Undefined. Leave blank or use 0.
data_input Type of data input. Options:
char Type of characters. Options:
NOTE: In binary mode, the number of characters must be
Example
Defines the following batch data for the QR Code: The error
correction level is H, which provides very high reliability. Leave
the mask number blank. The data input mode is Manual. The
type of characters are Numeric and the data is
0123456789012345.
"error_cor mask# data_input, char"
H Ultra high reliability level
Q High reliability level
M Standard level
L High density level
maximum number of characters (in the field)
decreases.
A Automatic
M Manual
A Alphanumeric
B Binary
K Kanji
N Numeric
represented by the 4-digit number in decimal.
1,"HM,N0123456789012345" p }
Samples A-9